Menu
Your Cart

Temperature sensor with display TN2511

Temperature sensor with display TN2511
Temperature sensor with display TN2511
  • MODEL: TN2511
  • LEAD TIME: in stock
$256.00
Add to Cart
Buy Now Ask Question
Add to Wish List Compare this Product

Product data sheet

Number of inputs and outputsNumber of digital outputs: 1; Number of analog outputs: 1
Measuring range
-50...150 °C-58...302 °F
Communication interfaceIO-Link
Process connectionthreaded connection M18 x 1,5 Internal thread
Installation length EL [mm]45
Application
Systemgold-plated contacts
Measuring element1 x Pt 1000; (to DIN EN 60751, class A)
Medialiquids and gases
Pressure rating [bar]300
Minimum installation depth [mm]12
Electrical data
Operating voltage [V]18...32 DC; (cULus - Class 2 source required)
Current consumption [mA]< 50
Protection classIII
Reverse polarity protectionyes
Power-on delay time [s]1
Integrated watchdogyes
Inputs / outputs
Number of inputs and outputsNumber of digital outputs: 1; Number of analog outputs: 1
Outputs
Total number of outputs2
Output signalswitching signal; analog signal; IO-Link; (configurable)
Electrical designPNP/NPN
Number of digital outputs1
Output functionnormally open / closed; (configurable)
Max. voltage drop switching output DC [V]2.5
Permanent current rating of switching output DC [mA]250
Number of analog outputs1
Analog current output [mA]4...20
Max. load [Ω]500
Analog voltage output [V]0...10
Min. load resistance [Ω]2000
Short-circuit protectionyes
Type of short-circuit protectionyes (non-latching)
Overload protectionyes
Measuring/setting range
Probe length L [mm]45
Measuring range
-50...150 °C-58...302 °F
Factory setting-40...150 °C / -40...302 °F
Set point SP
-49.8...150 °C-57.6...302 °F
Reset point rP
-50...149.8 °C-58...301.6 °F
Analog start point
-50...145 °C-58...293 °F
Analog end point
-45...150 °C-49...302 °F
In steps of
0.1 °C0.1 °F
Resolution
Resolution of switching output [K]0.1
Resolution of analog output [K]current output: MS / 4096; voltage output: MS / 3561
Resolution of display [K]0.1
Accuracy / deviations
Switch point accuracy [K]± 0,3 + (± 0,1 % MS)
Precision analog output [K]± 0,3 + (± 0,1 % MS)
Display accuracy [K]± 0,3 + (± 0,1 % MS)
Temperature coefficient [% of the span / 10 K]0,1; (In case of deviation from the reference condition 25 ± 5 °C)
Reaction times
Dynamic response T05 / T09 [s]1 / 3; (according to DIN EN 60751)
Software / programming
Parameter setting optionshysteresis / window; normally open / closed; switching logic; switch-on/switch-off delay; Damping; Display unit
Interfaces
Communication interfaceIO-Link
Transmission typeCOM2 (38,4 kBaud)
IO-Link revision1.1
Operating conditions
Ambient temperature [°C]-25...80
Storage temperature [°C]-40...100
ProtectionIP 67
Tags: ZORX-CJ24080105